Once a business runs a few servers for accounting, ERP or its website, the same question comes up: keep them in the office, or move them into a data center? The office closet is cheap at first, but power cuts, a hot room, a cut cable or a failed disk at midnight are all yours to deal with.

TWF takes that work off your plate. We work with FPT, VNPT and Viettel data centers in Ho Chi Minh City and handle everything from choosing where your servers live, assembling and configuring them, and cabling the rack properly, to routine maintenance once everything is running.

TWF engineer installing equipment in a data center rack

Server colocation in Ho Chi Minh City

You bring your own servers and we place them in a rack at the data center, which takes care of power, cooling, connectivity and physical security. The hardware and the data stay entirely yours.

The facilities we work with provide:

  • raised floors and precision cooling running around the clock;
  • overhead cable trays that keep network and power cabling apart;
  • CCTV along every row and controlled access;
  • gas-based fire suppression that puts out a fire without damaging electronics.

You can rent exactly what you need: 1U, 2U, half a rack or a full rack. We compare price, location and connectivity across FPT, VNPT and Viettel for you, so you don't have to chase each provider yourself.

Rack rows and overhead cable trays in a Ho Chi Minh City data center

Gas fire suppression system in the server zone

Server installation and setup

Whether a server is brand new or being moved from your office, it gets a proper check on the bench before it goes into the rack:

  • CPU, memory, fans and power supplies checked, firmware updated;
  • RAID configured and remote management (iLO, iDRAC) enabled;
  • operating system or virtualization platform installed, such as VMware, Proxmox or Hyper‑V;
  • a few hours of load testing to catch hardware faults early.

The photos below are from one batch of dual-CPU 1U servers we prepared: lids off, every memory slot and fan checked, and only then taken to the data center.

Checking the hardware of a dual-CPU 1U server before installation

Three servers being prepared before rack mounting

Network and security deployment

A stable system depends as much on the network behind it as on the servers. We install and configure switches, routers and firewalls, set up VLANs, build VPN access so staff can connect safely from outside, and write firewall rules that close off anything that doesn't need to be open.

Cables run through managed trays and every one is labelled at both ends. When something needs tracing or replacing later, it takes minutes instead of an afternoon.

Servers and switch cabled and labelled neatly

Rack with servers, routers and firewall installed

Maintenance and monitoring

Most server failures give warning signs first: a disk reporting errors, a fan slowing down, temperatures creeping up. Our maintenance plans are built around catching those early:

  • scheduled checks of hardware health and system logs;
  • OS and firmware patches applied on a schedule, outside working hours;
  • monitoring of storage, temperature and resources, with alerts when something looks wrong;
  • backups that are actually test-restored, not just assumed to work;
  • on-site visits to the data center to replace parts when needed.

Finished rack with network cables neatly bundled

Moving your servers from the office to a data center

If your servers currently sit in the office, we plan the move to keep downtime as short as possible: full backups first, IPs and network configuration prepared at the data center in advance, transport and installation in the evening or at the weekend, then every service checked before handover.

Aisle between rack rows inside a data center

How we work

  1. Talk through your needs: number of servers, applications, budget.
  2. Survey and proposal: which data center, how many U, network and backup plan.
  3. Preparation and installation: hardware checks, configuration, rack mounting.
  4. Handover: network diagram, access details, admin guide.
  5. Operations and maintenance: monitoring, scheduled maintenance, support when issues come up.

Frequently asked questions

We only have one server. Is a data center worth it?

If that server runs something important, such as accounting, sales or ERP, then yes. Renting space for a single 1U server usually costs far less than a few days of downtime.

FPT, VNPT or Viettel: which data center should we choose?

Each has its own strengths in location, connectivity and price. We recommend one based on your situation, for example where your users are and how much bandwidth you need.

Can we visit the data center to see our servers?

Yes, following each facility's access rules. We can go with you, or handle the visit for you.

Get in touch

Email vanthanh@twf.vn with a short description of your current setup, and we'll come back with a concrete proposal.